Commentary: I know that some people have used Racket 5.0.1 to build fluxus on Ubuntu 10.10. I couldn't get it to work. I reverted to PLT 4.2.2 and the build runs like a charm.
Steps:
-------------------------------------------
(1) apt-get required dependencies... copy&paste these commands into the terminal
Here is a list of commands to get dependencies you will need to compile fluxus and PLT on Ubuntu 10.10:
Basic dependencies
sudo apt-get install build-essential git-core
Scheme Dependencies
sudo apt-get install libxaw7-dev
Fluxus Dependencies.
sudo apt-get install scons libtiff4-dev libode-dev libfftw3-dev libsndfile1-dev
liblo0-dev libglew1.5-dev libfreetype6-dev libasound2-dev libglut3-dev libopenal-dev
libjack-jackd2-dev libpng12-dev
Fluxus-video dependencies.
sudo apt-get install libgstreamer0.10-dev ibgstreamer0.10-dev libunicap2-dev libavformat-
dev libswscale-devAudio (JACK):
sudo apt-get install jackd2 libjack-jack2-dev pulseaudio-module-jack
(you might install jack from the Ubuntu Software Center as well)
Note: you may need other dependencies, so watch your terminal and logfiles! I had a few pop up during the PLT make so keep an eye out.
-------------------------------------------
(2) Download from internet
- Download the fluxus source code tar.gz from http://www.pawfal.org/fluxus/packages/
- Download PLT 4.2.2 Unix source from http://download.plt-scheme.org/plt-4-2-2-src-unix-tgz.html
- Extract the compressed source files into your home folder. (go to Places - Home Folder if you're having trouble understanding what that means)
(3) Install PLT:
-To install fluxus in Ubuntu 10.10 we need to compile the source for PLT Scheme and install. For 32bit Ubuntu 10.10, download the Unix source of PLT 4.2.2. It is important that you download this version of the source as I tried with later versions (Racket 5.1) with some very cryptic compiler errors.
Terminal:
cd ~
cd plt-4.2.2
cd src
mkdir build
cd build
../configure --enable-shared --prefix=/usr/local (this is a crucial step!)
make
sudo make install
Note: This will take a while, but afterward PLT should be properly installed. If you are missing dependencies during the make: get them from the synaptic package manager, go back to your /plt-4.2.2/src/ and delete /build/. Then repeat the commands above.
-------------------------------------------
(4) Install fluxus with scons:
cd ~
cd fluxus-0.17rc5
scons
sudo scons install
If you are missing dependencies during the install:
1) get the packages from synaptic or apt-get
2) scons -c (the clean command)
3) repeat above steps
-------------------------------------------Note: A common error I got when building fluxus with scons was "'UINT64_C' was not declared in this scope"
Commentary: Mind you, this was when I built Racket 5.0.1 instead of PLT 4.2.2 Apparently there is a CXXFLAGS workaround for this type of error... but requires a ./configure command. fluxus has no ./configure file because it is installed with scons. Maybe you know what to do with it... and tried to build fluxus. I'm not sure if the scope is an issue with 4.2.2, but the patch was already in when I successfully build fluxus from 4.2.2.
My Solution:
To remedy this I had to remove "video" from this part of the code in /addons/SConscript (it's not really needed to build fluxus):
CHANGED
SConscript(dirs = env.Split("video artkp"),
exports = ["env", "CollectsInstall", "DataInstall", "BinaryModulesLocation", "MZDYN", "static_modules"])
exports = ["env", "CollectsInstall", "DataInstall", "BinaryModulesLocation", "MZDYN", "static_modules"])
TO
SConscript(dirs = env.Split("artkp"),
exports = ["env", "CollectsInstall", "DataInstall", "BinaryModulesLocation", "MZDYN", "static_modules"])
-------------------------------------------
(5) Look for libmzscheme3m-4.2.2.so, most likely in (your prefix)/lib, but you can find out using:
$ whereis libmzscheme3m-4.2.2.so
put the path to directory that contains it in your /etc/ld.so.conf file and then issue
$ sudo ldconfig
so that fluxus may find the library it needs.
-------------------------------------------
Good luck! This should get you most of the way, if not all the way, through the install! Keep at it!